(0)

Ring sizes and amount pulled from the manual. Black rubber is standard, I chose to use red.

Submitted by: Anonymous Anonymous

Submitted on: 2017-07-31 18:36:16 2017-07-31 18:36:16

(0)

Independence Day rubber ring kit with clear rubbers, red post sleeves and a red shooter tip. This ring kit allows more light to pass through the rings giving the playfield more lite

Submitted by: Anonymous Anonymous

Submitted on: 2017-09-24 12:29:52 2017-09-24 12:29:52

(0)

Full kit in red using Stern slim post sleeves. Ramp shots don't brick as bad using a thinner post sleeve.

Submitted by: Anonymous Anonymous

Submitted on: 2017-12-18 09:06:19 2017-12-18 09:06:19

(0)

All Blue with Clear slings, confirmed fit with detailed pics. See pics for locations. Also read the NOTE below. I know the manual calls for 5/16" rubbers on the elongated side of the lane dividers. I don't like how loose they fit so I use 3/16" for both sides. It also calls for a 3/4" on the plastic behind the alien head. It is too tight and deforms the plastic, I used a 1" and it works great. I prefer the slim posts at the left ramp entrance. If you are using regular bulb flashers, you should swap 1 of the 1-1/2" bands for a 2" band and go around the 3 posts between the center and right ramps. NOTE: I populated all of the single mini posts above the playfield with bands. If you don't want to do that simply delete the last row of 3/8" OD.

Submitted by: Derrick W. Derrick W.

Submitted on: 2022-08-02 22:10:23 2022-08-02 22:10:23

(0)

Blue on all but red flippers.

Submitted by: Anonymous Anonymous

Submitted on: 2023-12-26 11:23:59 2023-12-26 11:23:59