Titan Pinball Kits Database

Independence Day
Rubber Ring Kit by Derrick W.

(0)

Sega Pinball, Incorporated , July, 1996

6 Players

Manual Page Ring Diagram

Description

All Blue with Clear slings, confirmed fit with detailed pics.  See pics for locations.  Also read the NOTE below.

I know the manual calls for 5/16" rubbers on the elongated side of the lane dividers.  I don't like how loose they fit so I use 3/16" for both sides.  It also calls for a 3/4" on the plastic behind the alien head.  It is too tight and deforms the plastic, I used a 1" and it works great.

I prefer the slim posts at the left ramp entrance.

If you are using regular bulb flashers, you should swap 1 of the 1-1/2" bands for a 2" band and go around the 3 posts between the center and right ramps.

NOTE:  I populated all of the single mini posts above the playfield with bands.  If you don't want to do that simply delete the last row of 3/8" OD.

‹ ›

Kit Contents Print

Rubber Size/Type

Color

Quantity

Rubber Rings - Flipper Standard

Blue

Qty: 3

Post Sleeves - Standard

Blue

Qty: 2

Post Sleeves - Stern Slim Tapered

Blue

Qty: 2

Rubber Rings - 2 1/2 Inch I.D.

Translucent

Qty: 2

Rubber Rings - 1 1/2 Inch I.D.

Blue

Qty: 3

Rubber Rings - 1 Inch I.D.

Blue

Qty: 1

Rubber Rings - 5/16 Inch I.D.

Blue

Qty: 1

Rubber Rings - 3/16 Inch I.D.

Blue

Qty: 14

Rubber Rings - 3/8 Inch O.D.

Blue

Qty: 8

Rubber Rings - 3/8 Inch O.D.

Blue

Qty: 20

Comments

There are no comments for this kit.

Independence Day Rubber Ring Kit by Derrick W.

Kit Contents Print

Comments

Powered By Awesome Pinball Players Like You! Made with love by 86Pixels Titan Pinball © 2024

Independence Day
Rubber Ring Kit by Derrick W.

Powered By Awesome Pinball Players Like You!
Made with love by 86Pixels
Titan Pinball © 2024