Titan Pinball Kits DatabaseThe Avengers (Limited Edition)
Rubber
Ring Kit by Scott M.
(1)
Stern Pinball, Incorporated , 2012
4 Players
Description
Kit Contents Print
Rubber Rings - 2 1/2 Inch I.D.
Translucent
Qty: 4
Rubber Rings - 1 1/2 Inch I.D.
Translucent
Qty: 3
Rubber Rings - 3/4 Inch I.D.
Translucent
Qty: 4
Rubber Rings - 5/16 Inch I.D.
Translucent
Qty: 2
Rubber Rings - 3/16 Inch I.D.
Translucent
Qty: 12
Rubber Rings - 7/16 Inch O.D.
Translucent
Qty: 4
Rubber Rings - Flipper Standard
Red
Qty: 2
Post Sleeves - Standard
Red
Qty: 5
Post Sleeves - Standard
Blue
Qty: 5
Post Sleeves - Standard
Green
Qty: 1
Rubber Rings - Shooter Tip
Red
Qty: 1
Comments
2015-07-18 07:36:16 Scott M. wrote:
Kit contains extra blue and red sleeves to mix and match for personal taste . I personally use 2 blue on the Tesseract cube mounts and 2 blue each side of the stand-up targets behind the cube , the rest in red .
2016-04-17 06:35:45 Scott M. wrote:
Single green post sleeve is for the post behind the Tesseract targets ( under the right hand side of the start of the lift up ramp ) .
2016-05-29 22:14:20 David D. wrote:
Overall worked great but the post sleeves were too thick for most of the sleeves. The translucent rings look awesome lit up. I also change flipper rubbers to blue.