Titan Pinball Kits DatabaseGrand Lizard
Rubber
Ring Kit by Dave W.
(0)
Williams Electronics Games, Incorporated, a subsidiary of WMS Ind., Incorporated , April, 1986
4 Players
Description
Kit Contents Print
Rubber Rings - 2 1/2 Inch I.D.
White
Qty: 1
Rubber Rings - 1 1/2 Inch I.D.
White
Qty: 3
Rubber Rings - 3/4 Inch I.D.
White
Qty: 3
Post Sleeves - Standard
Blue
Qty: 9
Rubber Rings - 2 1/2 Inch I.D.
White
Qty: 2
Rubber Rings - 7/16 Inch O.D.
White
Qty: 1
Rubber Rings - 5/16 Inch I.D.
White
Qty: 4
Rubber Rings - Shooter Tip
Blue
Qty: 1
Rubber Rings - Flipper Standard
Lt. Blue
Qty: 2
Rubber Rings - Flipper Standard
Blue
Qty: 2
Comments
2024-09-09 17:19:20 Dave W. wrote:
One must cut 1/4 inch off length of a post rubber and add the cut piece to a full size post rubbers at the left ramp, as 2 original posts are taller than any manufactured rubbers available
2024-09-15 21:01:08 Dave W. wrote:
Gotta cut a standard post sleeve and add to full sized post sleeve rubber on the 2 non standard long posts in front of L ramp. This kit accounts for that.