Titan Pinball Kits Database

Harley-Davidson® (3rd Edition)
Rubber Ring Kit by Anonymous

(0)

Stern Pinball, Incorporated , 2002

4 Players

Description

[Tested and Complete] Made using a test kit of Titan rubbers on the actual game for proper tensions, sizes may differ from the manual as traditional rubber has a different tension and stretch than silicone. Changes from the manual are:
Sling size increased to 2-3/4", behind drops decreased to 2-1/4", 1-3/4" decreased to 1-1/2", one of the 1" above left pop increased to 1-1/4", inlane/outlane spike post rubber size reduced to 3/8 OD, 1/2" sleeves added to bottom sling posts to increase lifetime of sling bands. Please note that the post in front of the large Harley model is hard plastic, not a rubber, you won't find that in this kit.
Written install guide:
(2) 1/2" post sleeve, on the bottom slingshot posts | (5) Post sleeve, above each drop bank, each side of the center motorcycle shot, above the top right pop bumper | (2) 3/8" OD - on spike posts between inlanes/outlanes | (2) 7/16" OD - on wood guide rails near apron | (4) 3/16" ID - above right outlane, behind right side of scoop, 2 between upper/lower right side pop bumpers | (1) 5/16" ID - behind left side of scoop | (1) 3/4" - between upper/lower left side pop bumpers | (3) 1" - one above left outlane, two at inside of center motorcycle shot | (1) 1-1/4" - above left side pops | (1) 1-1/2" - above right outlane | (2) 2-1/4" - behind drop target banks | (2) 2-3/4" - Slings

‹ ›

Kit Contents Print

Rubber Size/Type

Color

Quantity

Rubber Rings - 2 3/4 Inch I.D.

Black

Qty: 2

Rubber Rings - 2 1/4 Inch I.D.

Black

Qty: 2

Rubber Rings - 1 1/2 Inch I.D.

Black

Qty: 1

Rubber Rings - 1 1/4 Inch I.D.

Black

Qty: 1

Rubber Rings - 1 Inch I.D.

Black

Qty: 3

Rubber Rings - 3/4 Inch I.D.

Black

Qty: 1

Rubber Rings - 5/16 Inch I.D.

Black

Qty: 1

Rubber Rings - 3/16 Inch I.D.

Black

Qty: 4

Rubber Rings - 7/16 Inch O.D.

Black

Qty: 2

Rubber Rings - 3/8 Inch O.D.

Black

Qty: 2

Post Sleeves - Standard

Black

Qty: 5

Post Sleeves - 1/2 Inch (Stern / DE)

Black

Qty: 2

Rubber Rings - Flipper Standard

Black

Qty: 2

Comments

There are no comments for this kit.

Harley-Davidson® (3rd Edition) Rubber Ring Kit by Anonymous

Kit Contents Print

Comments

Powered By Awesome Pinball Players Like You! Made with love by 86Pixels Titan Pinball © 2024

Harley-Davidson® (3rd Edition)
Rubber Ring Kit by Anonymous

Powered By Awesome Pinball Players Like You!
Made with love by 86Pixels
Titan Pinball © 2024