Titan Pinball Kits DatabaseGrand Lizard
Rubber
Ring Kit by Jim C.
(0)
Williams Electronics Games, Incorporated, a subsidiary of WMS Ind., Incorporated , April, 1986
4 Players
Description
Kit Contents Print
Rubber Rings - 2 1/2 Inch I.D.
Red
Qty: 1
Rubber Rings - 1 1/2 Inch I.D.
Red
Qty: 3
Rubber Rings - 3/4 Inch I.D.
Red
Qty: 3
Post Sleeves - Standard
Red
Qty: 7
Rubber Rings - 2 1/2 Inch I.D.
Green
Qty: 2
Post Sleeves - Standard
Green
Qty: 2
Rubber Rings - 7/16 Inch O.D.
Yellow
Qty: 1
Rubber Rings - 5/16 Inch I.D.
Red
Qty: 4
Rubber Rings - Shooter Tip
Green
Qty: 1
Rubber Rings - Flipper Standard
Green
Qty: 2
Rubber Rings - Flipper Standard
Red
Qty: 2
Comments
2017-01-26 14:33:01 Jim C. wrote:
One of the red posts must cut off 1/4 inch off of each straight edge and add the cut piece to a full size red post on the left ramp as 2 original posts are taller than any manufactured rubbers available.