Titan Pinball Kits DatabaseJohnny Mnemonic
Rubber
Ring Kit by Scott D.
(0)
Williams Electronics Games, Incorporated, a subsidiary of WMS Ind., Incorporated , August 08, 1995
4 Players
Description
Kit Contents Print
Rubber Rings - 2 1/2 Inch I.D.
Red
Qty: 2
Rubber Rings - 2 1/2 Inch I.D.
Blue
Qty: 2
Rubber Rings - 2 1/2 Inch I.D.
White
Qty: 2
Rubber Rings - 3/8 Inch O.D.
Blue
Qty: 2
Rubber Rings - 3/8 Inch O.D.
White
Qty: 4
Rubber Rings - 3/8 Inch I.D.
Blue
Qty: 3
Rubber Rings - 3/8 Inch I.D.
White
Qty: 5
Rubber Rings - 1 1/4 Inch I.D.
White
Qty: 1
Rubber Rings - 3/16 Inch I.D.
White
Qty: 8
Post Sleeves - Standard
Blue
Qty: 2
Post Sleeves - Standard
Yellow
Qty: 2
Post Sleeves - Standard
Black
Qty: 7
Rubber Rings - Flipper Standard
Blue
Qty: 2
Rubber Rings - Flipper Standard
Red
Qty: 2
Rubber Rings - Flipper Standard
Translucent
Qty: 2
Rubber Rings - Flipper Standard
Black
Qty: 2
Rubber Rings - 3/8 Inch O.D.
Grey
Qty: 2
Comments
2019-03-05 19:44:07 Scott D. wrote:
Some Yellow, and some Red and White.
2019-03-10 22:05:18 Scott D. wrote:
This is a full shop kit with some extra colorways. Most JM kits are missing a 2 1/2 ring because they went off the manual and missed a white one. (There are 5; each kicker, above left kicker, left of the pops and mid right side.) Also, an extra 3/8 OD by the pop exit.
Red 2 1/2 on kickers
Blue 2 1/2 left side front
Blue 2 1/2 on mid right side
White 2 1/2 on left of pops
Blue 3/8 OD on outlanes?White 3/8 OD by pops (2 extra if you don’t like blue on outlane.)
Blue 3/8 ID 1 on left front 2 on right outlane
White 3/8 ID by the pops (extra if you prefer in outlanes)
White 1 1/4 right of pops
White 3/16 ID on the lane guides
Blue Post Sleeves are two left posts by Jones
Yellow Post Sleeves are the 2 rightmost posts
Black Post Sleeves elsewhere (all 7 in case you hate the blue/yellow)
Flipper: Blue, Clear or Red all are in kit
Red 2 1/2 on kickers
Blue 2 1/2 left side front
Blue 2 1/2 on mid right side
White 2 1/2 on left of pops
Blue 3/8 OD on outlanes?White 3/8 OD by pops (2 extra if you don’t like blue on outlane.)
Blue 3/8 ID 1 on left front 2 on right outlane
White 3/8 ID by the pops (extra if you prefer in outlanes)
White 1 1/4 right of pops
White 3/16 ID on the lane guides
Blue Post Sleeves are two left posts by Jones
Yellow Post Sleeves are the 2 rightmost posts
Black Post Sleeves elsewhere (all 7 in case you hate the blue/yellow)
Flipper: Blue, Clear or Red all are in kit
2019-03-10 22:18:12 Scott D. wrote:
Basically, keep the pops area white for brightness.
Red Kickers
Blue where the playfield is very blue.
Blue posts by Jones.
Yellow posts are the two left posts.
Pick your flippers. There are options in this kit.
Red Kickers
Blue where the playfield is very blue.
Blue posts by Jones.
Yellow posts are the two left posts.
Pick your flippers. There are options in this kit.
2019-04-13 15:30:58 Scott D. wrote:
Added 2 3/8" IDs because I realized my machine was missing an outlane post. No wonder I was sucking so bad at this game.